Can Selenite Go in Water? (And Moon Water?)

Selenite, a variety of mineral gypsum, has become increasingly popular due to its eye-catching appearance and numerous metaphysical properties. Frequently used in spiritual practices and home decor, many people wonder if selenite can go in water, as exposing it to liquid could potentially affect the mineral’s integrity or energetic properties.

It is essential to understand how selenite reacts to water before incorporating it into water-based practices or decorations. This article will explore the topic by examining the physical properties and chemical composition of selenite and discussing the effects of water exposure on its structure and function in various contexts.

Read: Can Rose Quartz Go in Water? (Yes. You Can)

It is not recommended to place selenite in water because it has a value of 2.0 on the Mohs Hardness Scale, which is well below the minimum value required for minerals to survive underwater. Prolonged exposure to water will cause selenite to dissolve gradually.

Read: Can Rose Quartz Go in Water? (Yes. You Can)

Can Selenite Go in Water?

Selenite is a beautiful and popular mineral often utilized for its calming and balancing energy in both spiritual practices and home decor. It is a form of gypsum, which has a delicate and fragile composition. Many wonder if selenite can go in water, as it could be aesthetically appealing or enhance its effectiveness.

It is not recommended to place selenite in water because it has a value of 2.0 on the Mohs Hardness Scale, which is well below the minimum value required for minerals to survive underwater. Prolonged exposure to water will cause selenite to dissolve gradually. However, small amounts of clean water can be used to gently wipe or clean the surface of the stone without causing significant damage.

Care should be taken while handling selenite, as it is susceptible to cracks, scratches, and breakage.

Here are a few tips to keep your selenite clean and looking great:

  • Use a dry, soft cloth or a clean, dry paintbrush to gently remove dust from the surface.
  • If minimal cleaning is required, slightly dampen a soft cloth with water and gently wipe the surface but ensure to dry it immediately with another cloth.
  • Keep selenite away from humid locations or areas prone to spills or flooding, which may lead to potential water damage.
  • Avoid using chemical cleaners or abrasive materials on selenite, as this could cause damage or promote further dissolution.
See also  Can Citrine Go in Water? (Salt Water & Bath Water)

Following these guidelines can help protect and preserve your selenite for extended periods, ensuring it continues to grace your space with its calming presence.


Can Selenite Go in Salt Water?

Selenite, a crystalline form of the mineral gypsum, is a popular choice for various healing, meditation, and home decor purposes. However, when it comes to its interaction with salt water, caution is advised.

While selenite is soluble in water, it is important to note that it dissolves at a much faster rate in salt water due to the increased ion interaction. This means that if you decide to submerge your selenite in salt water, it may lead to the crystal losing its shape, luster, and structural integrity.

One reason some people may be tempted to place selenite in salt water is as part of a cleansing ritual. However, there are alternative methods that can be just as effective without exposing the crystal to potential harm. For instance, you can cleanse selenite by charging it under moonlight or by using sage, palo santo, or other energy-cleansing tools.

When handling selenite, gentle care is crucial to avoid scratches or damage to the delicate crystal surface. It is best to avoid direct contact with water, particularly salt water, to preserve the beauty and functionality of this mineral. Instead, opt for dry cleansing methods, or gently wipe the selenite with a damp cloth if necessary.

Can Selenite go in Moon Water?

One common practice is to charge water with the energy of the moon, known as Moon water, and some may wonder if it’s safe to add Selenite to it.

Although Selenite is a water-soluble crystal, it is not recommended to submerge it in water, even Moon water, for extended periods. The reason behind this is its composition. Selenite is a form of gypsum, which has a relatively low Mohs hardness rating of 2, making it a delicate crystal that can easily be damaged, especially when exposed to water.

Instead of placing the Selenite directly in the Moon water, there is an alternative method that can preserve the crystal while still benefiting from its properties. Placing the Selenite outside the container or next to it would still allow the crystal to contribute its energy to the water.

This approach will help maintain the integrity of the Selenite while allowing the Moon water to be charged with its calming and stress-reducing properties.

It is also important to note that not all Selenite crystals are the same. Some forms, such as Desert Rose or Satin Spar, might be even more susceptible to damage if placed in water. It is crucial to be cautious and knowledgeable about the specific type of Selenite that you are using.


Can You Take a Bath With Selenite?

Selenite, a variety of the mineral gypsum, is known for its beautiful, translucent appearance and healing properties. Many people are curious about using selenite in their bathwater to enhance the bathing experience.

See also  Can Rose Quartz Go in Water? (Yes. You Can)

While it can be tempting to add selenite to your bath for its potential benefits, it’s important to note that this crystal is water-sensitive. Over time, water can cause selenite to dissolve or become cloudy and lose its beautiful luster.

When bathing with selenite, it is advisable to place the crystal near the bathtub instead of submerging it in the water. This way, you can still benefit from the positive energy and healing properties of selenite without damaging the crystal.

For those who still want to incorporate selenite into their bathwater, there’s an alternative method to consider. You can place a selenite tower or wand near the bathtub without direct contact with the water.

This method allows the crystal to be near the water without risking damage while you bathe:

  • Place a clean towel or cloth next to the bathtub.
  • Put the selenite tower or wand on top of the towel or cloth.
  • Ensure the selenite is close to the bathtub but not touching the water.

By doing this, you can enjoy the soothing energy of selenite during your bath without causing harm to the crystal.

Can Selenite Go in Bathwater?

Selenite is a stunning crystal that is often used for its healing properties and as a decorative item in many households. Many people enjoy incorporating selenite into their self-care routines, such as using it during a relaxing bath. However, one may wonder if it is safe to place selenite in bathwater.

Unfortunately, selenite is a water-soluble crystal and will slowly dissolve when submerged in water for extended periods. It is not recommended to place selenite directly in bathwater as the crystal may lose its shape and structure over time.

If you still wish to incorporate the energy of selenite into your bath, there are alternative ways to achieve this without damaging the crystal:

  • Place selenite near the bathtub: Positioning your selenite crystal close to the bathtub, but not in direct contact with the water, can still allow you to enjoy its calming energy.
  • Use a selenite candle holder: A selenite candle holder can be placed near the bathtub to create a serene and soothing ambiance while protecting the crystal from direct water contact.
  • Take a selenite wand bath: Hold a selenite wand in your hand while taking a bath, and gently immerse it in water for a few seconds before lifting it out. Doing this allows you to enjoy a brief connection with the crystal while minimizing the risk of extensive damage.
See also  Can Moonstone Go in Water? (Answered)

Read: Can Carnelian Go in Water? (And Salt Water)

How to Cleanse Selenite?

First, it is essential to know that selenite is a soft mineral, with a hardness rating of only 2 on the Mohs scale. This means that it can be easily scratched or damaged. Avoid using rough materials when handling it, and take care when placing it anywhere.

As for cleansing, remember that selenite is water-soluble. This means that submerging it in water or exposing it to humidity may cause it to dissolve or lose its luster. To cleanse your selenite, avoid using water-based methods. Instead, opt for the methods listed below:

  1. Moonlight or sunlight: Place your selenite in a windowsill or outside under the moonlight or sunlight for a couple of hours. Both light sources can provide a gentle, natural way of cleansing the crystal. However, prolonged exposure to sunlight may affect the color of selenite, so it’s best to limit the time spent in direct sunlight.
  2. Smudging: Use a sage bundle or Palo Santo stick to produce a cleansing smoke. Pass the selenite through the smoke several times, focusing on your intention to cleanse and recharge the crystal. This method is not only effective but also adds an element of spiritual cleansing to the process.
  3. Sound cleansing: Use a singing bowl, chimes, or tuning forks to produce a sound with a high vibrational frequency. The sound waves will help to remove any stagnant or negative energy from your selenite.

Frequently Asked Questions

Is it safe to submerge selenite in water?

No, it is not recommended to submerge selenite in water. Selenite is a soft and delicate mineral that can be damaged when it comes into contact with water. Over time, water may cause selenite to dissolve and lose its luster.

What happens if selenite gets wet?

If selenite gets wet accidentally, it may become slightly cloudy, lose its shine, or even start to dissolve. In some cases, the water can cause cracks to form in the selenite. It’s essential to carefully handle and store selenite to avoid exposing it to water.

How does water affect selenite properties?

Water exposure can alter selenite’s physical properties, making it lose its shine and clarity. More importantly, water contact can weaken the crystal’s metaphysical properties. Selenite is often used for spiritual purposes, including energy cleansing and meditation. Exposure to water may weaken these properties and reduce the effectiveness of selenite in spiritual practices.


  • Nancy Grace

    My name is Nancy. Welcome to my website, "Angel Cosmos", where I explore the fascinating world of Angel numbers, crystals and numerology. I'm the founder of this site, and I'm thrilled to share my passion for this topic with you.